RB-77

QPL/AML approved by several State Highway Authorities

Contact us for a Free Sample.

RB77 is non-toxic , harmless, and  environmentally friendly.

RB-77 imparts an instant Brown to Orange-Brown Finish via Brushing or Dipping Galvanized Steel.

Zinc/Galvanized Steel Parts should be thoroughly cleaned and prepped prior to usage.

Directions:

1. Prepare the Zinc Surface by brushing or spraying Brush N Clean to de-grease and descale. If galvanized Steel Parts are to be used, it is highly recommended to Sand or use some abrasive action prior to the cleaner.
   
2. Rinse with Water.  Ensure no cleaning solution remains on surface.
3. Brush RB77 on Surface until Surface is entirely covered.  Pay attention to edges and hard to reach areas.   If you were unable to sand the surface during the metal prep stage, multiple coats of  RB77 are needed to further darken the tone.
4. Let Part sit for 30 Seconds- 1 Minute to Darken.  Repeat a second coat if parts are unsanded and need further darkening.
   
5. Rinse with Water.  Ensure no Patina remains on surface.
6. Air Dry.
   

Recommended Ancillary Products:

1. Brush N Clean
   

Square Footage : Approximately 90-100 Square Feet Per Gallon