Copper Patina 2
by Brushing on SteelCopper Patina 2 imparts an instant Copper Finish upon Brushing or Dipping.
Steel Parts should be thoroughly cleaned and prepped prior to usage.
Directions:
- Prepare the Steel Surface by brushing SURCLEAN-400 to degrease and descale.
- Rinse with Water. Ensure no cleaning solution remains on surface.
- Brush Copper Patina 2 on Surface until Surface is entirely covered. Pay attention to edges and hard to reach areas.
- Let Part sit for 15-30 30 Seconds to develop a darkened weathered copper effect. Rinse sooner for a brighter copper effect.
- After rinsing with water, air dry the steel surface.
- Seal Patina with an appropriate Lacquer for Metal.
Recommended Ancillary Products:
- SURCLEAN-400 Metal Conditioner
- Acrylaq-1045 FLAT Lacquer for Metal
Square Footage : Approximlately 90-100 Square Feet Per Gallon
Size | Square Feet |
8 oz Bottle | 6-8 |
1 Gallon | 90-100 |
4 Gallon Case | 360-400 |
5 Gallon Bucket | 450-500 |
Share This